Mark.R's latest activity

You have examples of what you've used this for Johnlong?

Might be worth steering clear then and buying a nextion display when I need to.

Been reading bits on the Nextion display and watching videos on youtube as you do, have known about the nextion display for a while but...

This works in the PE6 simulator as an idea of turning a bit on and off from a picaxe input, this being part of b0 would the be sent to...

Hi, question about the code I've written below. It sets up two MCP23017's to be all outputs. I've used b0 to b3 so that I can use the...

Morning chaps, thanks for your replies to the thread, I will have a read through the posted links. I wasn't looking at anything as...

Just been having a route about the forum and the picaxe website in the FAQ section and just wondered what fellow forumers (if that's a...

Nice explanation, thanks Alan.

Out of interest Alan what would be a more byte friendly way of doing the BINTOASCII command and why does the compiler use 40 bytes?

Agreed on all levels, I wouldn't have learned what I have without the efforts of these people.

Possibly last version of the code, this one unlike 3V0 above is tested and works, it's time I moved onto the next part. I've answered my...

Blimey, re-coded by a master I see, I will compare my attempt with yours to see how you've done it. Thanks again to all who have helped...

Evening chaps, The attached isn't tested as yet as I'm away from the test hardware but the attached does compile, fits on a 14M2 and...

So what your saying is that if you poked 0 you'd be writing to w0 and poke 27 would be b27 of w13 these are the only ones you have...

Hi, This is neat I was then going to ask about the fact that the sensor fail comes from the CJ_VAL (Cold Raw) for each sensor, how...