lbenson's latest activity

I would always try to make communications between chips work with wires before trying RF--make sure you connect 0V between the two chips.

I think you'd do best to start your own thread for this project.

Looks good. Onward and upward.

Gramps--if you want to control 2 (or more) servos using pots, I'd recommend that you go through Erco's code line by line. In the DO ...

There might be more to the program, but because erco doesn't use symbols for variables, pin numbers, or magic numbers (constants), that...

It's right beneath his text that you quoted.

Exactly what is it you are asking for?

If both pots are dithering by one, then I would expect that you would need a deadzone of 2, since a diff of 0 could become a diff of 2...

What would you recommend? I expect about 15 feet between relays (in basement) and picaxe (floor above). Was going to use 6-core 24AWG...

Papaof2--I won't be running any mains-powered saws (or other tools) off of the inverter, LOL (if I had to cut a board for some reason, I...

Thanks for letting me know of your experience, but the ones I tested round-robin fashion worked fine for switching a 300W work light and...

Just my name for the two devices to which all my monitoring devices sent duplicate TCP messages. Both run the Openwrt linux operating...

Those 16 LED "48 watt" units are good, bright lights, but I'm finding that I like these 20W --...

Eng460--Thanks very much for the thoughts and explanations. I had not previously considered that in the round-robin scheme I'm...

Flenser--thanks for the link. I've seen a number of references to "Battery University", but have never followed the links. Looks very...